2018 JCB 510-56 Loadall Telehandler

$85,000

This 2018 JCB Loadall model 510-56 is the machine many operators refer to informally as a “1056” — shorthand for roughly 10 tonne (10,000 lb) rated capacity in published chart conditions and roughly 56 ft of structural lift height capability. Manufacturer literature for comparable North American Tier 4–era 510-56 units typically quotes a maximum rated capacity on the order of 10,000 lb, a maximum lift height on the order of 56 ft (about 17 m), and a maximum forward reach on the order of 42 ft (about 12.8 m). Those headline numbers are marketing summaries; every real pick is limited by attachment, load centre, tyre condition, stabiliser deployment, wind, and the exact chart bound into the cab for your serial. JCB telehandler lift charts separate stabilised picks from pick-and-carry numbers. For example, excerpts from public JCB Tier 4i documentation for models in this family cite figures along the lines of roughly 4,000 lb at full lift height when stabilisers are used as the chart dictates, roughly 3,000 lb stabilised placements at extreme forward reach zones, and very small tyre-only ratings at extremes. Your safe working load must always match the ANSI / CSA-aligned chart on the machine—not this paragraph—before anyone rides a platform or swings material over crews. Motivation is supplied by JCB EcoMAX Tier 4–compliant turbocharged diesel architecture. Brochure ratings for broadly comparable Tier 4 / Tier 4 Final bundles in this horsepower class commonly land near roughly 109 hp gross with strong low-end torque for telescopic forklift use, exact net horsepower, DEF dosing, coolant routing and optional extras such as reversing cameras vary by dataplate serial and factory specification—verify stamping and software options during inspection alongside hydraulic auxiliary lines and multifunction joystick mapping. Approximately 6,557 cumulative hours warrants a prudent buyer inspecting telescoping wear pads, carousel slew backlash, multifunction auxiliary couplings, planetary hub fluids, pneumatic cab door seals where equipped, joystick pilot pressure, telescopic hoses in articulation bends, Michelin or BKT radial tyres for chunking, and axle oscillation damping health. Financing may be arranged subject to credit approval. Prairie Equipment can schedule Manitoba yard demos, organise additional imagery, and arrange permitted heavy-haul quotations across Western Canadian jurisdictions upon request.

• ✓JCB Loadall 510-56 — verbally people often say “10 / 56”: same 10,000 lb nominal class and ~56 ft telescopic height family as other full-size telehandlers in this segment (verify every pick on the decal chart)
• ✓Brochure lift envelope class: ~56 ft maximum lift height and ~42 ft maximum forward reach typical of this model line for steel, block, scaffold, and truck loading
• ✓6,557 hours — fair hours for a 2018 telescopic handler with life left when cylinders, pins and axles pass inspection
• ✓JCB EcoMAX turbo diesel paired with a multi-speed powershift telehandler transmission tuned for Loadall duty cycles
• ✓Rough-terrain axle package, telescopic stabilisers, and frame slew for placement on uneven slabs — crab / coordinated steer options per build (verify fascia decal)
• ✓16-photo gallery shot on site at Prairie Equipment — book a Manitoba inspection or request Western Canada transport options